Wholesale / Retailer / Contractor? Log in to view pricing Spring Hours 8 - 4:30 M-F *CLEARANCE - LOG IN NOT REQUIRED
Log in for Oregon Aquatics, Inc. Wholesale or Contractor Pricing
click image to view larger
3"x 25' Seam tape for EPDM Pond Liner
Manufacturers ID: W56RAC1698
Item ID: 0.549
Size: 3" x 25'
Use 3 inch wide double-sided seaming tape seam pieces of liner together for
waterfalls and streambeds; also sometimes used by itself in larger applications.
6 inch wide one side sticky seaming tape (100 foot roll) for patching and seaming
liner. For the best seam, use both 3” and 6” tape together (called aredundant seam). Always use QuickPrime Plus when seaming.
liner must be clean and dry in order to seam. Overlap approx. 6+” of
the liner to be seamed. Scrub the area to be seamed with clean water or
white gasoline, cleaning both liner pieces past where the seam tape will
attach. Let dry. Place a
narrow strip of plywood under overlap for
support while seaming. Use scrub pad to evenly apply QuickPrime Plus
past where the tape will attach. Let dry to the point that it is tacky;
not dry, not wet to the point of stringing out when touched.
wide single-sided tape to EPDM; (for large jobs, use 3” double-sided
tape between overlapped EPDM first, then 6” over the top). Press
together with a small silicone roller, pressing hard in all directions.
Warm seam in sun or with hair dryer.
Let bond 24 hours then fill.